蜜桃影像传媒

Sandmeyer Steel Company stocks commercially pure Titanium Plate Grade 2/2H (UNS R50400) in thicknesses from 3/16" (4.8mm) through 3.5" (88.9mm). Titanium Plate Grade 2/2H (UNS R50400) is the “workhorse” of the commercially pure titanium family. It offers a combination of high strength, ductility, and outstanding corrosion resistance for many industrial applications.

Titanium Grade 2/2H plate and plate products (UNS R50400) in stock for immediate delivery — .1875" (4.8mm) through 3.5" (88.9mm)

Available thicknesses for Titanium Plate Grade 2/2H (UNS R50400):

Titanium Plate and Plate Products Grade 2/2H
(UNS R50400) W. Nr. 3.7035

Combines High Strength and Ductility with Excellent Corrosion Resistance

Sandmeyer Steel Company is offering the “workhorse” titanium material from stock in full plates or custom cut sizes. Sandmeyer Steel Company has added titanium plate Grade 2/2H (UNS R50400) to North America's largest inventory of stainless steel and nickel alloy plate.

Any Way You Want It!
At Sandmeyer Steel Company, we have over 100 pieces of Value Added Plate Processing equipment all under one roof. You can purchase any custom shape or configuration you require to maximize plate yields. We can cut patterns utilizing five-axis abrasive waterjet or bandsaw. We can also offer Machincut rings and discs up to 124" (3150mm) OD and can drill your tubesheets and baffles through 8" (203.2mm). We can even have our plates produced into welded pipe, tubing, or structural shapes. Send us your drawings for finished or near-net shape parts, or we’d be happy to sell you full-size plates. At Sandmeyer Steel Company we work with the customer.

Stock Thicknesses

Titanium plate Grade 2/2H (UNS R50400) is available along with our inventory of stainless steel and nickel alloy plate. We maintain the largest inventory of specialty plate in North America — over 18 million pounds! Titanium plate and plate products Grade 2/2H (UNS R50400) are available in thicknesses from .1875" (4.8mm) through 3.5" (88.9mm).

General Properties

Commercially Pure Titanium Plate and Plate Products Combining High Strength and Ductility with Excellent Corrosion Resistance.

Titanium plate Grade 2/2H (UNS R50400) is titanium plate. It is the most widely-used titanium grade offering an excellent balance of strength and ductility with outstanding corrosion resistance in highly oxidizing and mildly reducing service.

Titanium plate Grade 2/2H (UNS R50400) has slightly lower strength than Titanium Grade 3 (UNS R50550) but is stronger than Titanium Grade 1 (UNS R50250). It has a minimum guaranteed yield strength of 40 ksi (275 MPa). Its corrosion resistance is equal to the other commercially pure plate grades.

Titanium plate Grade 2/2H (UNS R50400) can operate in continuous service up to 800°贵 (425°颁) and in intermittent service up to 1000°贵 (540°颁)

Titanium plate Grade 2/2H (UNS R50400) can be easily welded, machined, and hot and cold worked by standard shop fabrication practices.

---

Chemical Analysis

Typical Analysis (Weight %)

Mean Coefficient of Thermal Expansion

Mechanical Properties

Typical Room Temperature Mechanical Properties

Corrosion Resistance

The corrosion resistance of Titanium plate and plate products Grade 2/2H (UNS R50400) is the result of a strong, stable, protective oxide film layer that forms when the metal's surface is exposed to oxygen or moisture. The film growth accelerates under strong oxidizing conditions.

The protective film layer of Titanium plate Grade 2/2H (UNS R50400) provides excellent corrosion resistance in many challenging service environments — including oxidizing and organic acids, alkaline solutions, bleaches, wet chlorine, inorganic salts, salt brines, and seawater.

Titanium plate Grade 2/2H (UNS R50400) should not be used in strong reducing acids, anhydrous chlorine, strong caustic solutions, fluorides, or pure oxygen service.

NOTE: The information and data in this product data sheet are accurate to the best of our knowledge and belief, but are intended for informational purposes only, and may be revised at any time without notice. Applications suggested for the materials are described only to help readers make their own evaluations and decisions, and are neither guarantees nor to be construed as express or implied warranties of suitability for these or other applications. Stainless Steel, Nickel Alloy and Titanium products are classified as sheet if the thickness of the metals is less than 3/16” (4.7mm). If the thickness of the metal is 3/16” (4.7mm) or more, then it is considered a plate.